Exterior

Replacement windshield-washer reservoir filler neck supplied as a primary neck plus mounting bib, with an alternate split-neck version for smaller printers.

Replacement wheel cap.

Replacement hatch pin seat receiver.

Replacement washer bottle cap + seal.

Custom windshield glass stops ( ) frame mount supports.

Replacement bushing for the pop-up headlight pivot.

Snug-fit cover for a front windshield-wiper nut.

Threaded plastic ball-socket end for the door-handle drop linkage. The creator says the lower opening must be threaded after printing.

Flexible clip-on spacer with increased retention for the thinner lower arm of a twin-arm rear wiper, keeping the paired metal arms from clacking together.

Plastic latching receptacle that fits into the front luggage-compartment battery bracket and receives the quarter-turn battery-cover screw plug.

Replacement fog light housing.

Replacement shift boot and fader covers.

Replacement abschlepphaken abdeckung tow hook cover.

Replacement back hatch drain.

Replacement boot trunk lock grommet seal.

Replacement washer bottle drain plug cap.

Replacement fuel sender cover.

Replacement headlight wiper fluid ejector cover.

Replacement front windshield support.

Replacement hatch pin insert.

Replacement wheel center cap.

Front license-plate bracket that fastens vertically into the solid grille below the factory plate area, avoiding holes in the painted body panel.

Replacement taillight retaining thumbscrew designed to accept an M5 8 mm nut after the original fastener seized.

Replacement cover for the rear-window wiper pivot, developed against the original base and test-fitted on a 2003 vehicle.