911 997

Two-piece passenger-side interior door-pull conversion with a GT3-like shape. The creator says to mirror the files for the opposite side and attach the pull strap with a small screw.

Cabin-mounted mobile phone holder designed to accept an added wireless charger.

Replacement side mounting rail for the HEREGOES Android head unit that replaces the factory CDR30 or CDR24 stereo. V2 uses slightly oblong holes for fit adjustment.

Replacement button for a functioning remote key when the original plastic button is broken. Neutral white filament can transmit the remote’s red status LED.

Phone mount that fits between the side trim of the PCM and is sized for a Google Pixel 5 in a silicone case.

Replacement tensioner for the factory cupholder. The friction-fit design can function if the original small spring is missing.

Center mounting spacer that bridges the different lower profile created by a GT3-style front-bumper conversion and secures the existing front undertray. Its washer section can be retained or removed to adjust the mounting stack.

Left and right interior door-handle shells that convert the 997 door release to a GT3-style fabric pull strap. The archive includes a combined pair and strengthened separate left/right versions.

Two-piece glove-box CD-holder replacement that mounts two USB ports and provides a pull-out tray for SIM-card access. It assembles with three M3 screws; the updated drawer includes a retaining screw.

Two-piece offset front license-plate mount comprising a curved plate bracket and screw-in tow-eye adapter. The adapter is bored for through-bolt reinforcement; the creator describes the shorter adapter as 78 mm long and suggests an approximately 85 mm M10 bolt.

Support clip for the 997 front-bumper mesh and slats. The supplied version 2 STL is smaller and more concealed than the photographed version 1; use 3 mm cable ties and two clips per side.

Full-size 15.25-inch template for cutting replacement side-section stone-guard film, modeled for the 997 generation.