911 993

Left- and right-side frames for fitting nearly any 4x6 speaker behind the factory HiFi grilles while retaining the stock grille appearance.

Two-piece bracket that mounts a remote clutch bleed-screw assembly to the fan shroud. It is sized for a -3 AN bulkhead mount accepting a 3/8-24 bleeder screw and uses a removable end plate so the clutch line can be slid into place without disconnecting it.

Printable replacement for the break-prone front-seat backrest release control button, modeled from the shared latch style used across the listed seat applications.

Left- and right-side repair tabs for broken pollen-filter covers. Replacement variants are for missing original tab pieces; over-top variants wrap available broken pieces or reinforce intact tabs before being glued in place.

Three-piece installation set for an air-cooled rear main seal: a stock-hardware crankshaft centering guide, a punch that seats the seal flush with the case, and a second punch that seats it 1 mm below flush for a worn crank sealing surface.

Single-piece center-console drink holder with two circular wells. The creator's photograph shows the physical print installed between the seats.

Repair tabs for broken center-console switch covers, designed to retain with the original spring clamp.