Interior

Two-piece passenger-side interior door-pull conversion with a GT3-like shape. The creator says to mirror the files for the opposite side and attach the pull strap with a small screw.

Replacement driver door trim window.

Left and right replacement door-handle inserts designed to print face-down for a textured finish.

Replacement window switch panel.

Replacement 928 door handle end link.

Replacement door handle gear.

Reinforcement plate for the later door-card window-switch opening, designed for right-hand-drive cars and mirrorable for left-hand drive.

Passenger-side door-pocket corner support; mirror the supplied model for the driver side.

Replacement left-side door-handle linkage rod.

Snap-in sill and door-jamb vent with an added release tab.

Spacer for an original front-door speaker grille, opened internally to accommodate an Infinity 4x6 speaker.

Extended ball-socket connector for the exterior door-handle linkage, designed to add adjustment when the lever must be pulled too far or is difficult to reconnect. It uses an extra M5 nut; the creator prints it open-slot side up without supports at 0.2 mm layers and about 15% infill.

Left and right interior door-handle shells that convert the 997 door release to a GT3-style fabric pull strap. The archive includes a combined pair and strengthened separate left/right versions.

Replacement hanger for a rear-door shade. The creator designed it for the 955/957 and notes that it leaves some visual gaps because it does not perfectly follow the door-trim shape, but remains functional; mirror the model for the opposite side.

Replacement finger plate for an early interior door-release handle, modeled after degraded original trim during an upholstery restoration. The creator printed it in ABS for optional acetone smoothing and says PLA should also work.

Adapters for 4-inch door and rear midrange drivers plus a two-piece Dynaudio MD-102 tweeter mount. The source covers Dayton Audio RS100/RS100P and Dynaudio E430 midranges; the tweeter mount requires Burmester grilles or modified Bose/SPP grilles and its two pieces are bonded before installation.

Replacement mounting bracket for the interior door storage pocket, modeled for the creator's 1974 911.